01
2022-08
Electromagnetic heating is the heating of the container
Electromagnetic heating steam generator is a commonly used steam generator. As we all know, the production of steam promoted the second industrial revolution. In the future, electromagnetic steam will optimize the application of steam in industry and promote the rapid development of steam. Electromagnetic heating is to heat the container, directly conduct heat conduction to the object, reduce energy loss and electrical separation, and ensure safety. At present, the market is mixed. There are some novices in electromagnetic boilers, and the quality of products is uneven. Only by working on the development and research of electromagnetic applications can we produce more professional, safer and more convenient products.
2022-08-01
09
2022-08
Metal cylinder heated by electromagnetic heater
The host of the plastic granulator is an extruder, which is composed of an extrusion system, a transmission system and a heating and cooling system. Vigorously develop renewable resources and turn waste into treasure. 1. The extrusion system of the extrusion system includes plasticizing the hopper, the head and the plastic into a uniform melt through the extrusion system, and the extruder head is continuously screwed under the pressure established in the process. (1) Screw: It is the main component of the extruder, which is directly related to the application range and productivity of the extruder. It is made of high-strength corrosion-resistant alloy steel.
2022-08-09
19
2022-08
The role of the inductance coil, you know?
1. The basic functions of the inductor coil: waveform storage, oscillation, delay, notch, etc. 2. The image of the inductance coil: connecting DC and blocking AC 3. Detailed explanation: In electronic circuits; Inductive coils act on AC current limiting and form high-pass or low-pass wave recorder, phase shifting circuit and resonant circuit with resistors or capacitors. The transformer can perform AC coupling, transformation, AC and impedance transformation, etc.
2022-08-19
08
2022-09
Winding method of inductance coil
The inductor coil of the inductor may be made of a conductive material, typically copper wire, wound around a magnetic core, or the magnetic core may be removed or replaced by a ferromagnetic material. A magnetic core material with a higher permeability than air can more closely constrain the magnetic field around the inductive element, thereby increasing the inductance.
2022-09-08
19
2022-09
Four matters needing attention in the winding method of inductance coil
The so-called inductance coil is when there is a current in the wire, a magnetic field will be generated around it. We usually wind the wire into a coil to enhance the magnetic field inside the coil. Accordingly, the inductance coil is made by winding the wires (enameled wire, yarn package or bare wire) one by one on the insulating tube (insulator, iron core or magnetic core) (the wires are insulated from each other). General inductance coil has only one winding, the coil is called inductance coil. In the actual use of the coil, a considerable part of the inductance coil is non-standard parts, is wound according to the need. Pay attention to the following points when winding automatically:
2022-09-19
28
2022-09
Voltage and current relationship of inductance coil
Voltage and current relationship of inductance coil Inductance coil is a device that uses the principle of electromagnetic induction. When current flows through a wire, it creates an electromagnetic field around the wire, and the wire in the electromagnetic field itself induces the wire into the range of the electromagnetic field. The effect of the wire itself generating the electromagnetic field is called "self-induction".
2022-09-28