Welcome to the official website of Xindian Magnetic Technology!

imgboxbg
/
/
/
Do you need to adjust the power during the production of electromagnetic heaters?

Do you need to adjust the power during the production of electromagnetic heaters?

  • Categories:Company
  • Author:
  • Origin:
  • Time of issue:2021-06-29
  • Views:0

(Summary description)Whether it is necessary to adjust the power during the production process of the electromagnetic heater:

   Recently, customers who are in contact with electromagnetic heaters for the first time often ask, when the equipment reaches the required temperature during the production process, do I need to reduce the power of our electromagnetic heater?

Do you need to adjust the power during the production of electromagnetic heaters?

(Summary description)Whether it is necessary to adjust the power during the production process of the electromagnetic heater:

   Recently, customers who are in contact with electromagnetic heaters for the first time often ask, when the equipment reaches the required temperature during the production process, do I need to reduce the power of our electromagnetic heater?

  • Categories:Company
  • Author:
  • Origin:
  • Time of issue:2021-06-29
  • Views:0

Whether it is necessary to adjust the power during the production process of the electromagnetic heater:

   Recently, customers who are in contact with electromagnetic heaters for the first time often ask, when the equipment reaches the required temperature during the production process, do I need to reduce the power of our electromagnetic heater?

   1. Confirm the original heating form of the equipment that needs electromagnetic heating energy saving transformation:

A. Electric stove wire/quartz: Confirm the original number of heating zones and the heating power of each temperature zone, and choose the electromagnetic heater product of the corresponding power model nearby to match. If the power is less than 2KW, you will always choose the 2KW electromagnetic heating control board. The number of products is the same as the original heating zone. This method is mainly used for injection molding machines, film blowing machines, wire drawing machines, extruders and other equipment with low power.

B. Coal/diesel heating: confirm the diameter of the barrel, the length of the heating area, the temperature of electromagnetic heating according to the production, and the specific output requirements. This method requires a certain level of professionalism and experience, and the customer can provide the above data if necessary Appraisal by the manufacturer of the electromagnetic heater. This method is mainly used for larger power equipment such as water pelletizers and various boilers;

  2. Electromagnetic heater: The power matching of electromagnetic heating can refer to the matching method of daily air conditioning, that is, 15 square meters/KW can meet the heating demand;

  3. Transform the electric heating rod placed in the water to heat into an electromagnetic induction heater with the same power. Its power saving effect is less than 10%, which is not significant, but it can greatly improve its safety and oxidation resistance;

  In the process of plastic products, the electromagnetic heater rotates with the power adjustment switch, and the power of the electromagnetic induction heater can be adjusted. When the temperature of the barrel reaches the Curie point, the electromagnetic heating control panel automatically cuts off the power, which can reduce energy waste. So there is no need for customers to adjust the power by themselves. The electromagnetic heater series products adopt the principle of electromagnetic heating, which are safe, efficient, energy-saving, environmentally friendly, time-saving, fast and easy to operate. They are an ideal choice for the plastic heating industry. Its characteristics are as follows:

   1. The heat is large and the heating speed is fast, which makes the barrel directly heat up.

  2. Energy saving and money saving The thermal efficiency of the electromagnetic heater can reach more than 90%, which can save energy by 30%-80% compared with the resistance wire.

  3. Safety. There is no open flame when the electromagnetic heater is heated, which meets the fire protection requirements and can be used in places with high fire protection requirements.

  4. Green and environmentally friendly, no waste gas, waste residue and noise pollution, clean and sanitary, green and environmentally friendly, greatly improving the working environment of the production workshop.

   5. Easy to install, it can be used when the electromagnetic heating coil is connected to the installation. Use whatever you want.

  6. ​​The output power can be flexibly adjusted to meet the needs of different power situations.

   7. There is overheating protection to prevent damage to the IGBT module.

   8. The heating points are concentrated, and the surface of the electromagnetic heating coil does not generate heat.

   9. After reaching the set temperature, there is no need to adjust, and the output power is automatically reduced to zero, saving energy

Advantages of electromagnetic heater

With the development of industry, electromagnetic heating storms have swept across. Electromagnetic heaters are not only used in industrial fields, but also integrated into heating and bath heating in our lives. So is the electromagnetic heater really that good?
2021-06-29

The technology and application of electromagnet

The technology and application of electromagnets are divided into the following points 1. The position of electromagnet in the industry is very important. It is a basic electrical appliance and is known as the "king of electrical appliances". With the continuous development of the magnet and iron removal equipment market and the intensified competition, users not only have higher requirements for the quality of electromagnets and iron removal equipment, but also have higher requirements for production efficiency. In order to improve the quality and production efficiency of electromagnets and iron removal equipment, enrich my country's product categories, enhance industry product awareness, promote the development of China's electromagnet and iron removal equipment industry, and promote the research and application of electromagnet and iron removal equipment technology at home and abroad, organize Some activities.
2021-06-29

CONTACT INFORMATION

No. 3, Guangzhu South Road, Guangjiao Industrial Zone, Beijiao Town, Shunde District, Foshan City, Guangdong Province

THE PUBLIC

Follow the public account

二维码

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码

Copyright   ©   2021 Foshan Xin Electrostatic Magnetic Technology Co., Ltd.  All Rights Reserved    粤ICP备2021095347号   Powered by:300.cn