Welcome to the official website of Xindian Magnetic Technology!

imgboxbg
/
/
/
What are the customized ingredients of electromagnet manufacturers

What are the customized ingredients of electromagnet manufacturers

  • Categories:Company
  • Author:
  • Origin:
  • Time of issue:2021-06-12
  • Views:0

(Summary description)Because electromagnet manufacturers plan and generate for specific customers, the number of models cannot be enumerated one by one. If you need special models, please inform us about the following important parameters, and we can select or plan for you: the smaller the distance, the greater the strength. When asked about strength, distance must be added because the two are simply related.

What are the customized ingredients of electromagnet manufacturers

(Summary description)Because electromagnet manufacturers plan and generate for specific customers, the number of models cannot be enumerated one by one. If you need special models, please inform us about the following important parameters, and we can select or plan for you: the smaller the distance, the greater the strength. When asked about strength, distance must be added because the two are simply related.

  • Categories:Company
  • Author:
  • Origin:
  • Time of issue:2021-06-12
  • Views:0

Because electromagnet manufacturers plan and generate for specific customers, the number of models cannot be enumerated one by one. If you need special models, please inform us about the following important parameters, and we can select or plan for you: the smaller the distance, the greater the strength. When asked about strength, distance must be added because the two are simply related.
Under normal circumstances, the greater the power, the greater the power, which is similar to a proportional relationship. When the power is large to a certain level, the electromagnet manufacturer is close to the magnetic saturation, and the strength increase is small.
If the resistance, current, and voltage are changed, but the power is fixed and the size of the wire package is fixed, the strength is fixed.
For the same resistance, if you increase the number of winding turns (change to a larger enameled wire), the strength will increase, but if the enameled wire is already fully wound, you cannot change the enameled wire, otherwise the wire package will be too large and even impossible to install Into the iron shell.
The same enameled wire diameter, increasing the number of turns, the strength will be slightly reduced (because the resistance has increased, its weakness on strength has exceeded the increase in the number of turns to strengthen the strength).
Change the wire diameter of the enameled wire (resistance changes accordingly), but the power connection is fixed (P=U2/R; R and U are changed to make P fixed) and the force is fixed.
What matters is the size of the power that is not determined by the time. When the power is turned on for a long time, the power should not be too large, otherwise it is easy to get a fever.
In order to improve the success rate of samples, the banquet customers will provide the following prerequisites as much as possible:
Maximum distance, power request, voltage (or current, resistance), life (refers to the total number of actions of the electromagnet manufacturer during the application period), use (for which building), and other available information.
Reasons for the abnormal noise during the operation of the electromagnet manufacturer and the method of disposal
The electromagnet manufacturer has very noisy noise during the operation process. The reason is that the electromagnet manufacturer's message connection surface is not properly connected, and the magnetic circuit is not smooth, which makes the electromagnet manufacturer produce noise. The electromagnet manufacturer’s message connection surface is dirty, and the brakes are adjusted too tightly, so that the magnet manufacturer’s suction cannot cooperate, and the message surface tilt will also lead to the above signs.
The essentials for dealing with very noisy noise in the operation of electromagnet manufacturers:
(1) The operating power supply voltage is too low, and the electromagnet manufacturer cannot absorb it and generates noise, so the voltage of the operating circuit should be increased.
(2) The magnetic system device is improper or touched and tilted or the needle is stuck, so that the iron core cannot be flattened and noise occurs. The magnetic system should be adjusted during the punishment to find out and eliminate the cause of the mechanical jam.
(3) Rust on the pole surface or foreign matter (such as oil and dust) invades the pole surface of the iron core. The pole face of the iron core should be liquidated at this time.
(4) Electromagnet manufacturer noise occurs due to excessive contact spring pressure. Normally adjust the contact spring pressure.
(5) The iron core or short-circuit ring should be replaced if noise occurs due to the fracture of the short-circuit ring.
(6) Dissatisfaction with excessive wear on the pole surface of the iron core. The iron core should be changed.
(7) Short circuit between coil turns. You can always change the coil.

Advantages of electromagnetic heater

With the development of industry, electromagnetic heating storms have swept across. Electromagnetic heaters are not only used in industrial fields, but also integrated into heating and bath heating in our lives. So is the electromagnetic heater really that good?
2021-06-29

The technology and application of electromagnet

The technology and application of electromagnets are divided into the following points 1. The position of electromagnet in the industry is very important. It is a basic electrical appliance and is known as the "king of electrical appliances". With the continuous development of the magnet and iron removal equipment market and the intensified competition, users not only have higher requirements for the quality of electromagnets and iron removal equipment, but also have higher requirements for production efficiency. In order to improve the quality and production efficiency of electromagnets and iron removal equipment, enrich my country's product categories, enhance industry product awareness, promote the development of China's electromagnet and iron removal equipment industry, and promote the research and application of electromagnet and iron removal equipment technology at home and abroad, organize Some activities.
2021-06-29

CONTACT INFORMATION

No. 3, Guangzhu South Road, Guangjiao Industrial Zone, Beijiao Town, Shunde District, Foshan City, Guangdong Province

THE PUBLIC

Follow the public account

二维码

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码

Copyright   ©   2021 Foshan Xin Electrostatic Magnetic Technology Co., Ltd.  All Rights Reserved    粤ICP备2021095347号   Powered by:300.cn